Hydraulic Oils
The Shell Tellus range of hydraulic oils
The Shell Tellus range of hydraulic oils is designed to increase the life of the pump and filters as well as reduce the energy required to power a hydraulic system, saving energy. A lot of our customers who own Injection Moulding Machines, Hydraulic Presses, Excavators, and Tippers have found great benefit in using Tellus in their machines.
Gear Oils
Omala range of Gear oils
Our Omala range of Gear oils are designed with the life of the gear in mind. Typically used by a lot of Automotive Component Manufacturers, Auto Manufacturing Units, and Quarries who have seen a significant increase in their oil life as well as equipment life. We even have dedicated products designed specifically for Worm and Helical Gears.
Engine Oils
Shell’s Rimula range of heavy
duty engine oils
Shell’s Rimula range of heavy-duty engine oils not only lasts longer than the competition’s products but also helps the environment by reducing fuel consumption and increasing the efficiency of an engine. The Rimula range has takers mainly from the Construction and Mining Segment in their heavy-duty equipment (earthmovers and the like), as well as by DG Service Providers.
Rimula is one of the first engine oils in India to have a CK4 specification.
Heat Transfer Oils
Shell Heat Transfer Oils
Shell Heat Transfer Oils are designed to transfer heat with minimal loss of energy and long oil life. Our Heat Transfer Oils have had a long and old partnership with Thermax Boilers and have satisfied and even exceeded the demands placed by our customers in the Paper, Textile, Plywood, and Chemical.
Turbine Oils
Turbo range of turbine oils
Our Turbo range of turbine oils are designed to give the maximum protection and efficiency to turbines used in Cement, Sugar, Marine and Power Generating Industries.
Compressor Oils
The Shell Corena Range
The Shell Corena range is designed specifically for both rotary vane and screw air compressors and reciprocating (piston) air compressors. Many of our Industrial and Borewell Rig Customers have seen the long oil life benefits of using Corena in their Air Compressors. Our synthetic range of Compressors has an ODI of 8000 to 12000 hours.
Bearing & Circulating Oils
Morlina Range for the Textile and
CNC industry
Our Morlina Range is designed for applications requiring high speed and low loads, typically in spindle bearings. Best suited for the Textile and CNC Industry.
Transmission Oils
The Shell Spirax range of oils
The Shell Spirax range of oils is designed to keep your axles and gearboxes going. Those in the Construction segment, as well as Crusher, Quarry, and Fleet Owners have been very satisfied by using Spirax in their machines. Our oils can be used for
- Gearboxes and manual transmissions
- Axles
- Automatic transmissions
- Cone Lubrication (for Crushers)
Slideway Oils
The Shell Tonna range of Slideway oils
The Shell Tonna range of Slideway oils is very useful for CNC Machines and in Steel Industries. The oils are designed to prevent stick-slip and thus reduce the number of rejections. They also have a faster rate of separation from water which allows for reuse.
Grease
For every industrial sector
We have a wide range of greases to suit almost every need in Every Industrial Sector. Our greases come in almost every combination of NLGI grade and Base oil viscosity and can meet any challenge and conceivable need.
Shell LubeAnalyst
Condition monitoring service
Shell LubeAnalyst is a condition monitoring service we offer where we analyse the condition of the equipment by testing the oil. For a reasonable fee, we not only tell the customer the condition of their equipment but our experts will also give advice on what steps to take to keep the equipment at peak performance. Results and advice are given within 48 hours after receiving the sample*.
*conditions apply
To know more, please visit www.shell.in